Solution >>
Smart M2M Controlling System


Smart M2M Controlling System——Intergrate information collction, data analysis, alarming and real time monitoring. Widely used for equipment to realize remote M2M, security and protection, failure prediction, smart maintenance, energy saving.



Application Model


永泰隆电力传感器应用示意图2.png

SSGo Smart electricity sensor  Collect a variety of data from electrical equipment, and upload it to cloud through WIFI, RS485, GPRS and other means of communication. Store, sort, analyze data,and all data are presented on the PC side through the application system , for monitoring current data of equipment running status, safety warning. Moreover, it support reverse control realizing remote intelligent management effectively. 



The Smart electricity sensor sends real-time data to the mobile APP, and waveform displayed.

AAP界面.jpg

▲ waveform display.various parameter on APP


System Function

  • Real time monitoring — Monitor and collect harmonic,starting current, current, voltage, power, power factor, energy, temperature;the sampling rate can reach 1000P/S.

  • Prediction analysis — Real time display data and data trend;store historical data can be queried and exported , analyse and early diagnose equipment characteristic, running state and trend;to take effective maintenance and maintenance measures in advance, improve the equipment maintenance and management efficiency, and prolong the service life of the equipment.

  • Early-warning — Smart measurement,handle overload,spark situation, electric leakage and over-temperature situation, foreknow failure, real time alarming, power off automatically;

  • Energy consumption monitoring — Real-time monitoring of the voltage, current, active power, reactive power factor, etc.

  • To realize timely understanding of energy consumption and timely monitoring and control of bad energy consumption;

  • Remote control — Network and online, users can remote control, realize remote management, save manpower, prevent accidents;



System highlights

  • Extensive applicability —— The maximum current can reach 100A for AC and DC electric equipment.;Compatible with all kinds of terminal power equipment,and used in different applications;

  • Easy installation —— install with DIN rail,only 18mm wide,

  • Measurement precision —— measurement class: 1.0;

  • Secondary development —— Two 485 interfaces are reserved,be used to expand the function and the application flexible configuration;

  • Multiple communication —— Support RS-485, WIFI, GPRS ,etc.;

  • High performance price —— High cost-effective, with a smart and networked monitoring to increase its added value.


158-167.jpg158.jpg
Single phase smart electricity sensorThree phase smart electricity sensor
Technical ParametersTechnical Parameters
Voltage:    180~240VVoltage:    3*180~240V
Current:    5(80)ACurrent:    5(100)A
Accuracy class:    1.0Accuracy class:    1.0
Frequency:    50-60HzFrequency:    50-60Hz
Impulse constant:    1000imp/kWhImpulse constant:    1000imp/kWh
Starting current:    0.004IbStarting current:    0.004Ib
Power consumption:    ≤10VA  Power consumption:    ≤10VA  
Installation:    DIN RAILInstallation:    DIN RAIL
Temperature range:    -20~70℃Temperature range:    -20~70℃
Relative humidity:    ≦75%Relative humidity:     ≦75%
Communication mode:    WIFI/RS485Communication mode:    WIFI/RS485
Dimension:   90*18*72mmDimension:    100*76*65mm
Net weight:    0.12KGNet weight:    0.33KG

立即购买